Descargar Imprimir esta página

identités 823023 Manual De Instrucciones página 14

Mesita de cama tasmania con 4 bandejas

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
Clean the product regularly with warm water, a soft cloth and a neutral detergent.
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
Dry with a clean, dry soft cloth.
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
Periodically check all screws and bolts for wear and strength. Replace all broken, damaged or worn parts immediately.
Periodically check the cylinders.
In the event of a malfunction, do not repair the table yourself. Consult an authorised dealer.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Respect the conditions for storing and stowing your product.
In a dry and temperate place
Protect your product by packaging from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
All components must be stored without any load (do not place too heavy objects on the product components, do not
jam anything...).
TECHNICAL SPECIFICATIONS
Base dimensions
Height adjustable
Tray dimensions
Dimensions of auxiliary plates
Weight
Maximum weight supported
PERIOD OF USE
The life expectancy of this product is 5 years under normal use, safety and maintenance conditions. Beyond this period, the
product can be used for as long as it is still in good condition.
WARRANTY
This product is guaranteed for two years from the date of purchase by the user. IDENTITIES will provide replacement parts for
any part that has broken due to a manufacturing, design or material defect. Contact the distributor from whom you purchased
the product in case you need to make a claim. Failures resulting from accidental damage, misuse, alteration, or wear and tear
are not covered by this warranty. Contact the dealer from whom you purchased the product to apply the warranty.
Version Juin 2023
Width. 71 cm x Depth. 45 cm
79 à 114 cm
39 cm à 80 cm
25 x 35 cm
18 kg
25 kg
14

Publicidad

loading

Este manual también es adecuado para:

823021