Installation; Carrying The Unit; Setting Up The Unit; Removing The Protective Film From - Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso

Installation

7 Installation

7.1 Carrying the unit

NOTICE
Damage to sensitive components of
the unit due to shocks or vibrations
EN
Do not expose the unit to any strong
i
US
vibrations or shocks
Do not move the unit during opera-
i
tion

7.2 Setting up the unit

Portable and mobile HF communication appli-
ances can interfere with the effectiveness of
electrical medical devices
Do not stack the unit next to or together with
i
other appliances
If, however, this unit is operated next to other
i
units or stacked with other units, monitor the
unit carefully in the configuration selected in
order to ensure normal operation
The unit can be set up as a tabletop unit or
mounted on a wall using the wall bracket
The load-bearing capacity of the table or wall
must be suitable for the weight of the unit (see
"4 Technical data")
Setting the unit on a table
To prevent errors when scanning the im-
age data, install the unit so it is not ex-
posed to vibrations
Place the unit on a firm, horizontal surface
i
16
OBJ_DOKU-0000002448-001-mehrere.indd 16
7.3 Removing the protective film
from the touch screen
Grasp one corner of the protective touch
i
screen film and peel it off carefully

7.4 Attaching the Stylus

The stylus is held on the unit by a magnet
i
Place the stylus in the indentation provided
7
kg
2142100008L41 1708V002
24.08.2017 14:41:44