112 Scanning The Image Data Via A; Computer; 113 Scanning Image Data Via The - Air Techniques ScanX Swift View Instrucciones De Montaje Y Uso

WARNING
Contamination of the unit
Clean and disinfect the barrier enve-
i
lope before removing the PSP
In the event of heavy soiling, eg from blood,
i
dry clean the barrier envelope and protective
gloves, eg wipe with a clean cellulose cloth
Disinfect the barrier envelope and protective
i
gloves with a disinfection wipe
Alternatively, use a spray disinfectant on a
soft, lint-free cloth
Place the barrier envelope with the PSP on
i
the disinfection wipe
Allow the barrier envelope to fully dry
i
Pull off the protective gloves, disinfect and
i
clean the hands
NOTICE
Powder from the protective gloves
on the PSP damages the unit during
scanning
Completely clean all traces of the pro-
i
tective glove powder from your hands
before handling the PSP
2142100008L41 1708V002
OBJ_DOKU-0000002448-001-mehrere.indd 27
Tear off the barrier envelope
i
11.2 Scanning the image data via a

computer

Starting the imaging plate scanner and
software
The scanning process using the DBSWIN
imaging software is described
For further information on using the imag-
ing software, refer to the relevant manual
Press the on/off switch
i
unit
Switch on the computer and monitor
i
Start DBSWIN
i
Select the patient
i
Select the exposure values in the X-ray mod-
i
ule
Set the required resolution
i
Click the Scan button
i
If ScanManager is enabled, select the X-ray
i
job on the touch screen of the unit
Result:
An animation on the touch screen prompts for
insertion of the imaging plate
Insert the imaging plate only once the bar
above the animation is green
Figure 5: Example of the animation prompting
for insertion of the imaging plate
Usage
EN
US
to switch on the
27
24.08.2017 14:41:48