Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Check if the rear wall clearance protection
component is present at its location
(if provided with the product). If the
component is not available, or if it is lost
or fallen, position the product so that at
least 5 cm clearance shall be left between
the rear surface of the product and the
wall of the room. The clearance at the rear
is important for efficient operation of the
product.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes
to improve the cooling system.
Refrigerant with high temperatures
C
may flow through these areas,
resulting in hot surfaces on the
side walls. This is normal and does
not need any servicing. Please pay
attention while touching these
areas.
Refrigerator / User Guide
13/31EN
Publicidad
