Descargar Imprimir esta página

HOMCOM AA1-056 Manual De Instrucciones página 19

Ocultar thumbs Ver también para AA1-056:

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Disposal of the Battery
Do not store the battery in temperatures above 70 ℉ (21℃) or below 32℉ (0 ℃).
THIS SCOOTER CONTAINS LEAD-ACID SEALED BATTERIES TO BE RECYCLED .
IN ACCORDANCE WITH ITS LOCAL AND STATE LAWS. PLEASE READ CAREFULLY
AND UNDERSTAND THE INSTRUCTIONS FOR YOUR DISPOSAL.
Disposal: This product contains sealed lead-acid batteries that must be disposed of or
recycled in an environmentally sound manner. Do not dispose of batteries in the
household waste. Do not dispose of batteries in a fire as this may cause battery leakage
or explode. Incineration, landfill disposal, and placement of lead-acid batteries sealed
with household waste is prohibited by law in most areas. Return used batteries to an
authorized battery lead-acid recycle or consult your local vehicle battery dealer.
WARNING: Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Do not store the battery in temperatures above 70 ° F (21 ° C) or below 32 ° F (0 ° C).
Charger
Use only the supplied battery charger. Input the charging port in the scooter battery
case with the pin of the charger firstly before the plug into the socket. It can protect
the charging port to be over current. If the charger is damaged, stop using it immediately
and replace it with a charger Press recommended.
Wheel
Wheels and components of the transmission system are subject to normal wear and tear.
It is the responsibility of the user to periodically check the wheels for wear and to adjust
and replace the components of the drive train as necessary.
Problem Solution
ISSUE
The scooter doesn't work
Possible Cause
The Battery is undercharged
The cables or connectors of are
loosen or disconnected.
The Battery is damaged.
The Accelerator is broken by
crash or violent pull.
The Controller is broken by
overload or over-current..
The Motor is broken by
overload or over-current.
19
Solution
Fully charge the Battery. First charge
should be 8 hours and up to 6 hours
of recharge.
Open the footplate to check if the
cables are connected with the
controller.
Change to a new set of Battery.
The scooter is recommended to be
charged frequently weekly. The
battery will be deep damaged if it is
not charged for long period.
Change to a new Accelerator.
Change to a new Controller.
Change to a new Motor.

Publicidad

loading

Este manual también es adecuado para:

Aa1-056v02Aa1-077Aa1-056rdAa1-077bkAa1-056bk