HOMCOM AA1-056 Manual De Instrucciones página 6

Assembling
Front Wheel&Handlebar Assembly
Front Wheel Assembly
1.Turn the front fork in the flat
position.
4.Use 1*5mm hex wrench to
lead and insert the axle to the
hole of the front fork.
7.Twist the other hex wrench to tighten the screw with the axle
and the front fork.
2.Take out the front wheel
and the 2*5mm hex wrench to
assemble.
5.Insert the screw of the axle
to the hole of the front fork.
6
3.Take out the screw of the axle
in the front wheel.
6.Use the 2* 5mm hex wrench
to insert the screw of the axle
and fix with one hex wrench.