The Scooter running time is
short.
The scooter stops working
suddenly.
The scooter runs slowly
The scooter cannot be
charged
The battery is not charged to full.
The Reset Button(Fuse) tripped.
It is on the left side of the battery
case, it will automatically fire and
shut off if the motor is
overloaded. Excessive overload
(steep slope or too much weight
of a user) could have caused the
motor to overheat and trip the
switch.
The Brake are not set correctly.
The scooter is overloaded.
The road situation is not
suitable.
The Charger is broken.
The Battery is damaged.
The Reset Button(Fuse) tripped.
It is on the left side of the battery
case, it will automatically fire
and shut off if the motor is
overloaded. Excessive overload
(steep slope or too much weight
of a user) could have caused the
motor to overheat and trip the
switch, then the scooter cannot
work and be charged.
The Charging Port is excessive
current to short circuit.
20
The battery needs to be charged.
Fully charge the battery. The first
charge should be 8 hours and up to
6 hours of recharge.
Press the Reset Button back and
Restart the scooter.
Verify all connectors and cables to
ensure they are connected and
adjusted.
Refer to the Brake Adjustment
instructions.
Be sure not to overload the scooter
with more than 50kg, maximum
weight limit, steep slopes or towing
objects behind the motorcycle. Avoid
overloading the scooter, as the
batteries and components used will
wear out before long.
Inappropriate conditions of use
Mount only on solid, flat, clean and
dry surfaces such as pavement or
level ground.
Change to a new charger.
Change to a new set of battery.
The scooter is recommended to be
charged frequently weekly. The
battery will be deep damaged if it
is not charged for long period.
Press the Reset Button back and
Restart the scooter.
Verify all connectors and cables
to ensure they are connected and
adjusted.
Change to a new Charging Port.