Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
1. Clean the attachments thoroughly
before storing. Place attachments in the
accessory bag.
2. Gather the cord and wrap it loosely
around the cord hooks. Lock plug
retainer onto the power cord.
It is recommended to clean tools with
water after each use.
NOTE:
When the tools are worn or
broken, replace the tools. To purchase
tools, call 1-877-531-7321 (US) / 1-844-
608-3081 (CA).
1. Press the tool release button to remove
the tool from the hose.
Tool Release Button
2. Press the cover release button on the tool
and pull off tool cover. Remove the insert
by pulling it off with force, if necessary.
CARPET CLEANER STORAGE
CLEANING TOOLS
- 19 -
3. Empty the clean water tank. Rinse it out
before placing back on the unit. Open
the clean water tank cap to allow it to
air dry.
4. Empty the dirty water tank then rinse,
clean and dry before placing back
on the unit. The wide tank opening
is designed to fit your hand inside to
thoroughly clean, rinse and dry.
5. Store the carpet cleaner in a dry, indoor
area at room temperature.
Cover
Release
Button
Insert
3. Rinse thoroughly with clean water. Allow
the parts to dry before reinstalling.
DO NOT wash in the dishwasher.
DO NOT install while damp.
4. Reinstall the tool cover and the insert
back into place until a click is heard.
Publicidad
