Descargar Imprimir esta página

ADE WS 2302 Instrucciones De Operación página 62

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
Setting up the outdoor sensor
DANGER of severe injuries
− During wall installation, there must be
The wireless outdoor sensor is equipped with a hanging
eyelet on the rear side.
− Place or hang the outdoor sensor at a position where
it is protected from the direct influence of the weath-
er (rain, sun, wind, etc.).
Suitable locations are, for example, under an awning
or in a carport.
Use additional wireless sensors
The base station is supplied with a wireless sensor. How-
ever, you can operate it with up to three outdoor sensors.
Please contact service@ade-germany.de for more infor-
mation or a paid order.
‚ The outdoor sensors can be situated in different
spaces or outdoors.
‚ Every sensor must be allocated its own number (= no.
of the transmission channel).
62
Weather station with wireless outdoor sensor WS 2302
no electrical cables, gas or water pipes
installed in the walls at the mounting site.
Otherwise, when drilling holes, there is a
risk of electric shock!

Publicidad

loading