ADE WS 2302 Instrucciones De Operación página 74

Repeat alarm (SNOOZE function)
− Press
The alarm signal stops according to the setting
made (default setting: 5 minutes). The correspond-
ing alarm symbol and
After the set time has elapsed, the device turns on
to wake you up again. This procedure can be re-
peated multiple times.
− To exit snooze mode, briefly press any button (except
) or press and hold
2 seconds.
Other functions
Illuminating the display
− Pressing
about 8 seconds.
Changing the batteries
The battery symbol indicates that the inserted
batteries should be replaced.
‚ When the battery symbol is displayed under
replace the batteries in the base station.
‚ When the battery symbol is displayed under the
number of the outdoor sensor, replace the batter-
ies in the outdoor sensor. Note the number of the
displayed channel (only when using several outdoor
sensors).
74
Weather station with wireless outdoor sensor WS 2302
once when the alarm signal sounds.
turns on the display backlight for
flash on the display.
for more than
,