Descargar Imprimir esta página

cecotec CECOFRY RAIN PACK Manual De Instrucciones página 58

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
ENGLISH
Tips:
-
We recommend the use of liquid degreaser for food use to remove any remaining dirt.
If the basket and grille are very dirty, soak them in hot water and cleaning solution for 10
-
minutes.
1. Clean the inside of the appliance with hot water and a non-abrasive sponge, taking care
not to damage the resistance.
2. Clean the spray nozzle with hot water and a non-abrasive sponge.
3. Remove the protection grille and clean the grease with hot water, detergent and a
non-abrasive sponge.
4. To clean the tank and internal oil tubes, you can enter the DIY mode and at oil level 0
you can press the DIY button until the tank and internal tubes are empty, the device will
indicate that there is no more oil left by means of the "Add Oil" notice.
Storage
1. The power cable can be stored inside the appliance.
2. Make sure all components are clean and dry.
3. Be sure to clean the sprayer and the removable protective grille.
6. TROUBLESHOOTING
Problem
E1
E2
The air fryer does not
work
Cooked foods are raw.
58
CECOFRY RAIN PACK
Possible causes
Temperature sensor
not working
Temperature sensor
not working
The appliance is not
plugged in.
The food is too big.
The temperature used
is too low.
The preparation time
is too short.
Possible solutions
Contact the official Cecotec Technical
Support Service.
Contact the official Cecotec Technical
Support Service.
Connect the power cable to an earthed
plug socket.
Put smaller batches of food in the basket.
Smaller batches are cooked more evenly.
Select a higher temperature (see the
"Operation" section).
Select a longer time (see the "Operation"
section).

Publicidad

loading

Este manual también es adecuado para:

03305