Worx WR206E Manual De Instrucciones página 4

Users can view the electronic instructions at https://eu.worx.com/en/landroid/
vision-technology/.
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions.
warnings and instructions may result in electric shock, fire and/or serious injury.
Carefully read the instructions for the safe operation of the machine.
Save all warnings and instructions for future reference.
-This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
For the purposes of recharging the battery, only use the detachable supply unit
WARNING:
provided with this appliance.
WARNING: To reduce the risk of injury to persons and damage to the machine, do not remove
battery pack before switching off the machine.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
Training
a) Read the instructions carefully. Make sure you understand the instructions and be familiar with
the controls and the proper use of the appliance.
b) Never allow people unfamiliar with these instructions or children to use the appliance. Local
regulations can restrict the age of the operator.
c) The operator or user is responsible for accidents or hazards occurring to other people or their
property.
Preparation
a) Ensure the correct installation of the automatic perimeter delineation system as instructed.
This machine works without boundary wire or virtual boundary. It can automatically identify the
working area and non-working area through the camera. Once the machine is turned on, the
camera will automatically turn on and work at the same time. The machine recognizes that the
lawn is the working area through the camera, and the non-working area that is not the lawn.
When the machine walks to the boundary between lawn and non-lawn, it will automatically turn
to return to the working area.
Add a magnetic strip to separate it from the neighbor's lawn. The machine returns when it
encounters a magnetic strip while mowing. Return along the magnetic strip when returning.
b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks,
wires, bones, and other foreign objects. Periodically inspect and clean the boundaries between
grass and non-grass. Clearing boundaries helps the lawnmower to identify the working area.
c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not
worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.
e) WARNING! The lawnmower shall not be operated without the guard in place.
Operation
1. General
a) Never operate the appliance with defective guards, or without safety devices, for example
4
Failure to follow the
EN