Switching Off - Stihl HLA 65 Manual De Instrucciones

Make sure the cutting blades are not
N
touching the ground or any other
objects.
Hold your trimmer with both hands –
N
one hand on the control handle – the
other hand on the loop handle or
handle hose.
2
Unlock the power tool by moving the
N
retaining latch (2) to ‚.
2
Push down the trigger switch
N
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
HLA 65, HLA 85
Trigger
Motor speed can be controlled with the
trigger switch. Depress the trigger switch
to accelerate the motor.
3
4

Switching Off

Release the trigger switch
N
lockout (1) and the trigger
switch (2).
3
Move the retaining latch (3) to ƒ –
N
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
English
1
2
2
53