Maintenance And Care - Stihl HLA 65 Manual De Instrucciones

English

Maintenance and Care

The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Always set the locking lever to
ƒ
on the machine.
Complete machine
Control handles (locking lever, trigger
switch lockout and trigger switch)
Intake port for cooling air
All accessible screws, nuts and bolts
Battery
Battery compartment
Cutting blades
Gearbox and con-rod
Safety information labels
1)
Afterwards spray the blades with STIHL resin solvent
2)
STIHL recommends STIHL servicing dealers
56
and remove the battery before starting any work
visual inspection (condition)
clean
Checking operation
clean
visual inspection
clean
retighten
visual inspection
clean
Check operation (battery ejection)
visual inspection
1)
clean
sharpen
inspection by a specialist dealer after
every 50 hours of operation
topping up of STIHL gear lubricant by a
specialist dealer after every 50 hours of
2)
operation
replace
X
X
X
X
X
X
X
X X
X
X
2)
X
X
X
X X
X
X X
X X
X
HLA 65, HLA 85