Assembling The Unit - Stihl HLA 65 Manual De Instrucciones

English
Horizontal Cut (with straight cutter bar)
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
44
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.

Assembling the Unit

Mounting the loop handle
Only versions without telescoping shaft
7
8
2
3
6
9
Place the clamp (1) in the loop
N
handle (2) and position them both
against the shaft (5) between the
carrying ring (3) and handle
hose (4).
Position the clamp (6) against the
N
shaft.
Line up the holes.
N
Insert the screws (7) with
N
washers (8).
Fit the square nuts (9) and screw
N
home the screws.
HLA 65, HLA 85
7
8
1
4
9