ProMinent Sigma X Guia De Inicio Rapido página 9

Assembly
Note this assembly information:
Vibrations may disturb the functional-
„
ity of the discharge valve and suction
valve.
Secure the metering pump to prevent
vibrations from occurring.
The valves cannot close properly if
„
they are not vertical.
Make sure that the suction valve and
discharge valve are vertical.
The motor may overheat. Maintain
„
sufficient clearance between the air
intake opening and the walls. Ensure
that there is sufficient clearance.
* available in other designs and lengths
2 m*
100 – 230 V ±10%
50/60 Hz
EN
9