Hiyasu HS-9UIEE Manual De Usuario página 27


Operation of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Remote control
X-FAN
X-FAN button
●
PressingX-FAN button in COOL or DRY
mode,the icon
indoor fan will continue operation for 10
minute in order to dry the indoor unit even
though you have turned off the unit. After
energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO,FAN or
HEAT mode.
Note: X-FAN is the alternative expression of
BLOW for the purpose of understanding.
TURBO
TURBO button
●
In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this
function will be canceled automatically.
Names and functions of wireless remote control
is displayed and the
+
+ button
●
For presetting temperature increasing.
Press this button,can set up the
temperature, when unit is on. Continuously
press and hold this button for more than
2 seconds, the corresponding contents
will be changed rapidly, until unpress the
button then send the information, °C (°F)
is displaying all along. In Auto mode, the
temperature can not be set up, but operate
this button can send the signal. Centigrade
setting range :16-30; Fahrenheit scale
setting range 61-86.
-
- button
●
Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button and
hold for two seconds, the relative contents
can quickly change, until unhold this button
and send the order that the °C (°F) signal will
be displayed all the time. The temperature
adjustment is unavailable under the Auto
mode, but the order can be sent by if
pressing this button.
LIGHT
LIGHT button
●
Press this button at unit On or Off status,
Light On and Light Off can be set up.
After powered on, Light On is defaulted.
– 24 –