Hiyasu HS-9UIEE Manual De Usuario página 32


Emergency Operation
When the remote controller is lost or damaged,
please use the manual switch on the main unit.
In that case, the unit will operate in AUTO mode
and the temperature setting or fan speed can not
be changed.
The manual switch can be operated as below:
 Turn on the unit: Press AUTO/STOP button to
enter AUTO mode.
The microcomputer will select the mode
(COOL, HEAT, FAN) automatically according
to the room temperature for reaching
comfortable effect.
 Turn off the unit: Press the AUTO/STOP button
to switch off the unit.
 The operation mode is seen in the following table.
Mode Model
AUTO COOLING
AUTO HEAT PUMP
AUTO HEAT PUMP
 This switch is to be applied when the remote controller is missing.
Emergency Operation
Temperature setting
25°C (COOL,FAN)
25°C (COOL,FAN)
20°C (HEAT)
– 29 –
AUTO
Airflow rat
AUTO
AUTO
AUTO
Manual switch