Publicidad
Idiomas disponibles
Idiomas disponibles
53
english
1. Safety information
1.1 General remarks
These installation and operating instructions contain items of
information of fundamental importance which must be taken
into account during assembly, operation and maintenance.
They should therefore be read without fail before installation
and commissioning by the fitter and also the responsible
specialist staff/operator. They must always be available for
consultation at the plant's place of deployment.
Not only are the general safety hints included in this «Safety
Hints» section to be observed, but also the special items of
safety information included in the other sections.
1.2 Identification of notices
The safety information contained in these
instal lation and operating instructions,
non-compliance with which can lead to danger
for people, are specially marked
with the general danger symbol
«Safety sign according to DIN 4844-W9».
This symbol is a warning of dangerous electric
voltage.
«Safety sign according to DIN 4844-W8».
You will find this symbol in the case of safety
Warning
information non-compliance with which can
endanger the machine and its functions.
Information signs mounted directly on the plant, such as, for
example
- rotating direction arrow
- symbols for fluid connections
must be obeyed without fail and be kept in a fully legible state.
1.3 Staff qualification and training
The staff deployed for assembly, operating, maintenance and
inspection tasks must show that they have the appropriate qua-
lifications for such work. The field of responsibility, competence
and supervision of the staff must be stipulated exactly by the
operator.
1.4 Risks in the event of non-compliance
with the safety information
Non-compliance with the safety information can result in both
danger for persons and also for the plant and the environment.
Non-compliance with the safety information can lead to the loss
of claims for damages of any kind.
Publicidad
