Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Control system overview
1
Display
for displaying the operating status
for displaying the menus and values for setting
Standard display: Current water temperature [°C]
2
Button On|Off, Quit Error
Switch Fleece filter on or off
Reset system messages
3
LED, 2 colours
LED is lit red: Control system switched OFF (OFF)
LED is lit green: Control system switched ON (ON)
4
Button Menu
For selecting the following menus and changing the values:
Duration of filter fleece feed "Forward time" (FF)
Break time of filter fleece feed "Break time" (br)
Delay time Error 22 "Delay time Er22" (E2)
Info/Error display (E3)
5
Button Fw>>
Start manual fleece feed
When the button is pressed again, the process is cancelled
6
Blue LED
LED is lit during active fleece feed
Switching ON/OFF
Proceed as follows
Switching on:
Press and hold
for 3 s.
LED (3) is lit green.
The display indicates On for approx 5 s.
Switching off:
Press and hold
for 3 s.
LED (3) is lit red.
The display indicates OFF.
Information
The display indicates the water temperature by default.
If there is a voltage interruption, the control system will remain
switched on.
The control system switches off all functions.
If there is a voltage interruption, the control system will remain
switched off.
EN
Proficlear0372
59
Publicidad
