Publicidad
Idiomas disponibles
Idiomas disponibles
The filter fleece is almost used up
In23
Possible cause
The filter fleece has reached the pre-set minimum
duration of use. The filter fleece will be used up in
× days.
The control system is not connected with the "OASE
Control" app via the OASE Control network
Reset the system message
Press the
Monitoring with the system message In23 is only possible when using the "OASE Control" app.
– When the app is no longer in use, it is necessary to set the parameter E3 = 0. Otherwise the
system message In23 will be permanently displayed on the control system.
Maintenance and cleaning
WARNING
Risk of severe injuries or death by electric shock.
Disconnect all electrical devices in the water from the power supply before reaching into the wa-
ter.
Disconnect the unit from the mains before you start working on it.
CAUTION
Risk of injury due to sharp-edged components.
Proceed with caution during any work on the filter container to prevent injuries caused by sharp-
edged components.
Cleaning the device
Do not use aggressive cleaning agents or chemical solutions as they could attack the housing or
impair the function of the unit.
Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
After cleaning, thoroughly rinse all parts in clean water.
64
button and hold it for 5 s
Remedy
Plan the reel change
Set the parameter E3 = 0 to deactivate the system
message (→ E3: Status display, filter fleece on the
control system)
Connect the control system with the "OASE Con-
trol" app
Publicidad
