Publicidad
Idiomas disponibles
Idiomas disponibles
Basic operation
4.8
Emptying the drip tray and coffee grounds container
After dispensing several beverages, the drip tray (8) and the coffee grounds
container (7) can become full. The projecting float (16) indicates the current
filling level of the drip tray.
After a specified number of beverages have been dispensed, the appliance
also shows that the drip tray and coffee grounds container are full.
Always empty the drip tray and coffee grounds container.
16
Fig. 13: Emptying the drip tray and coffee grounds container
1. Pull the drip tray (8) forwards out of the appliance.
2. Remove the coffee grounds container (7) and empty it.
3. Empty the drip tray.
4. Insert the coffee grounds container.
5. Push the drip tray into the appliance until fully inserted.
Information
If you empty the drip tray and the coffee grounds container while the appli-
ance is switched off, the appliance does not register this process. Therefore,
it is possible that you are requested to empty the containers although the
drip tray and the coffee grounds container are not yet full.
70
7
8
Publicidad
