Publicidad
Idiomas disponibles
Idiomas disponibles
Care and maintenance
Removing the water filter
The water filter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water filter
in a vessel filled with tap water in the refrigerator.
Remove the water filter as follows:
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
»
The menu appears on the display.
2. Navigate to the Care > Filter > Remove filter menu.
3. Select Start using the arrow buttons and confirm with "menu/ok".
4. Follow the further instructions on the display.
»
The water hardness is automatically reset to the previous setting.
»
The ready symbol appears on the display.
5. Re-adjust the water hardness if necessary, (see section 9.8 Setting the
water hardness on page 91).
94
Publicidad
