Ecolab EcoPro Instrucciones De Servicio página 158

Maintenance
10 Maintenance
Personnel:
Protective equipment:
DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in
the product data sheet (safety data sheet) for the metered medium.
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools. Use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
Maintenance and repair work may only be performed by authorised and trained
specialist personnel in compliance with current local regulations.
The safety regulations and required protective clothing (PPE) must be
complied with when working with chemicals. Attention must be paid to the
information included on the product data sheet of the dosing medium used.
During or prior to maintenance and repair work:
– Use only original spare parts.
– Depressurise the pressure line.
– Disconnect the dosing medium supply and clean the system thoroughly.
– Unplug the mains plug or disconnect all power sources, and secure against
accidental re-activation!
The consumables and spare parts for your pump model can be identified using
the pump code.
The pump code (
Ä 'Equipment ID / nameplate' on page 84 ) of the pump.
(
Before maintenance is carried out, stock up on the pump-specific consumables
and spare parts (
on page 68 ).
For all queries to the manufacturer, it is important that you give them the
correct pump name and model. This is the only way of ensuring that we
can answer your query correctly and quickly.
MAN046879 Rev. 12-12.2023
n Mechanic
n Qualified electrician
n Service personnel
n Specialist
n Protective gloves
n Chemical-resistant protective gloves
n Protective eyewear
n Safety shoes
Ä 'Pump key 'EcoPro' ' on page 84 ) is on the nameplate
Ä Chapter 11 'Wearing parts, spare parts and accessories'
56