Ecolab EcoPro Instrucciones De Servicio página 161

10.3.1 Control units for pumps with PCB '252050' or '252052'
Use the control unit with the relevant litre output (order details:
parts' on page 69 ).
10.3.2 Control units for pumps with PCB '10240130' or '10240132'
Fig. 19: Location of the switch panel on the PCB (bottom view)
Default DIP switch position
The corresponding conveying capacity is programmed on the test bench before delivery,
all DIP switches on the board are set to OFF.
Flow rate
Litre output according to
Nameplate
N/A = not relevant for the flow rate option
Switch
PCB 1
All PCBs
Off
59
Maintenance
Ä Chapter 11.2 'Spare
2 3 4
N/A
Off Off
MAN046879 Rev. 12-12.2023
5 6
N/A N/A