Publicidad
Idiomas disponibles
Idiomas disponibles
2) TALKBACK LEVEL
(PTT + CH rotary knob)
When the function is on, while pressing PTT switch (13),
Turn the CH rotary knob (6) to adjust the TALKBACK level. 9 steps
-
from 01 to 09.
D) MENU
The order of the 12 functions is the one described in this manual.
However, the function displayed when entering the MENU will be
the last function modified by the user.
Whatever the function, the procedure is the same:
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu.
2.
Press the CH knob (6) to confirm. The current value of the selected
menu blinks in the display.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to change the value.
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU. The parameter stops flashing and, if the function
has more than one parameter, the following parameter flashes...
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears from the display.
Note: The UP/DN buttons (6) on the microphone have the same
effect as the rotary CH knob (6). The PTT switch (12) exits MENU
without validating.
disappears from the display.
1) COLOR
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {COLOR}.
2.
Press the CH knob (6) to confirm. The current color blinks in the
display.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to change the color.
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU.
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears from the display.
Default color is Or.
appears.
2) DIMMER
DIMMER function allows adjusting the brightness of the lighting.
10 steps from 0 to 9.
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {DIMMER}.
2.
Press the CH knob (6) to confirm. The current value blinks in the
display.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to change the value.
dis-
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU.
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears from the display.
Default value is 5.
appears.
12
disappears from the display.
disappears from the display.
dis-
appears.
dis-
Publicidad
