Publicidad
Idiomas disponibles
Idiomas disponibles
3) CONTRAST
CONTRAST function allows adjusting the contrast of the display.
10 steps from 0 to 9.
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {CONTRAST}.
2.
Press the CH knob (6) to confirm. The current value blinks in the
display.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to
change
the value.
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU.
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears from the display.
Default value is 5.
4) KEY BEEP
Beep on changing the channel, keys etc...
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {KEY BEEP}.
2.
Press the CH knob (6) to confirm. The current value blinks in the
display.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to activate (on) / deactivate (of).
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU.
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
disappears from the display.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears from the display.
When the function is activated, "BP" appears on the display.
Default value is on.
5) ROGER BEEP
The Roger Beep sounds when the PTT switch (13) of the microphone
is released in order to let your correspondent speak. Historically as
appears.
CB is a "simplex" communication mode, it is not possible to speak
and listen at the same time (as it is the case with a telephone).
Once the conversation was over, he said "Roger" in order to
prevent his correspondent that it was his turn to talk. The word
"Roger" has been replaced by a significant beep. There comes
"Roger beep" from.
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {ROGER BP}.
2.
Press the CH knob (6) to confirm. The current value blinks in the
display.
dis-
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to activate (on) / deactivate (of).
4a. Short press the CH knob (6) again to validate your choice and
stay in the MENU.
4b. Long press (1s) the CH knob (6) again to validate your choice
and exit the MENU.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
appears.
appears from the display.
Note: the Roger beep also sounds in the loudspeaker if the KEY
BEEP function is active. If the KEY BEEP function is not active, only
the correspondent can hear the Roger Beep. When the function
is activated " ".
In
PA
mode the function is not allowed.
Default value is oF.
6) MICROPHONE TYPE
Your MC KINLEY II FCC allows you to use a dynamic or electret
dis-
microphone. To select the type:
Press the CH knob (6) for 4 seconds to enter MENU.
1.
Turn the rotary CH knob (6) or use the UP/DN buttons (6) on the
microphone to select the menu {MIC TYPE}.
2.
Press the CH knob (6) to confirm. The current value blinks in the
display.
13
disappears from the display.
appears.
dis-
appears.
Publicidad
