DENTSPLY DeguDent Cercon heat plus P8 Instrucciones De Uso página 36

5 Controls
Firing program
Program Max. temperature
1 1350 °C
2 1450 °C
3 1450 °C
4 1500 °C
5 1500 °C
6 –
7 –
8 1580 °C
36
5.1 Control panel with membrane keyboard and
All programs can be started, functions selected, and
parameters entered via the control panel. All relevant
parameters are shown on the display. All entries are made
via the membrane keyboard below the display. The con-
trol panel key and indicators serve the following functions:
P1–P8 keys
Start the heating programs.
Green P1–P8 key LEDs
Will be lit once one of these programs is started.
Red CLOSED LED
Will be lit once the lifting table has been lifted completely
and the sintering chamber closed.
STOP key
Cancel a running program.
INFO key
Accesses the info menus
(see DISPLAY key, INFO key)
DISPLAY key
Accesses the temperature/time menus
(see DISPLAY key, INFO key)
Duration Material
Cercon
ca. 8h
light, medium
Cercon
ca. 8h
light, medium
Cercon
ca. 12h
light, medium
ca. 8,5h Cercon
ca. 14h Cercon
– –
– –
ca. 10h Service fi ring
display
Usage
® base, colored, 1 Cercon
sintering tray
® base, colored, 2 – 3 Cercon
sintering trays
® base, colored, large-span bridges
> 8 units
1 – 3 Cercon
® ht
sintering trays
large-span bridges
® ht
> 8 units
–
–
Serves the silicium oxide
layer of the heating elements
® heat plus
® heat plus
® heat plus