cecotec ENERGYSILENCE 600 WOODDESK Manual De Instrucciones página 13

ENGLISH
- Place and firmly tighten the back grid fixing nut to fix the back grid.
- Place the blades on the central shaft until they match the back grid fixing nut.
- Place the nut shaft and turn it clockwise until it is fixed.
Put the back and front grid together. Make sure that the holes on each one match perfectly
-
and use the 3 closing clips to keep them safely attached.
- Place the body in the base and tighten the screw in the base.
4. OPERATION
- In order to activate or deactivate the air-oscillation function, press or pull on the button.
- To adjust air direction, tilt the fan head downward or upward.
- Air speed can be adjusted by pressing one of the following buttons:
0: Off / 1: Low / 2: Medium / 3: High
-
- Plug the cord into a power supply.
5. CLEANING AND MAINTENANCE
- Always unplug the product from the power supply before cleaning or repairing it.
- It is suggested to clean the product with a mild cleaning agent and a soft and wet cloth.
Do not use abrasive products such as solvents, acids, or alcohol to clean the plastic
components, as these could be deformed or damaged.
- Do not allow water to enter the motor or touch the cord during cleaning.
6. TECHNICAL SPECIFICATIONS
Product reference: 08230/08231/08232
Product: EnergySilence 600 WoodDesk/ EnergySilence 610 SteelDesk/ EnergySilence 620
RetroDesk
Voltage and frequency: 40 W, 220-240 V~, 50 Hz
Description
Fan maximum flow
Fan power consumption
Service value
Power consumption on standby mode
Fan sound power level
24 ENERGYSILENCE 600 WOODDESK
ENERGYSILENCE 610 STEELDESK
ENERGYSILENCE 620 RETRODESK
Symbol Value Unit
F 30.0 m /min
3
P 30.6 W
SV 1.0 (m /min)/W
3
P 0.0 W
SB
L 59 dB (A)
WA
Maximum air speed
Service value measurement standard
Contact details to obtain more information
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product and/or
batteries must be disposed of separately from household waste. When
this product reaches the end of its shelf life, you should dispose of the
batteries/accumulators and take them to a collection point designated by
the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
8. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the official Cecotec Technical Support Service at +34 963 210 728.
9. COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES,
S.L. All rights reserved. The contents of this publication may not, in whole or in part, be
reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic,
mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC
INNOVACIONES, S.L.
ENGLISH
C 2.6 m/seg
IEC 60879
Cecotec Innovaciones SL.
C/ de la Pinadeta s/n, 46930
Quart de Poblet, Valencia (Spain)
ENERGYSILENCE 600 WOODDESK 25
ENERGYSILENCE 610 STEELDESK
ENERGYSILENCE 620 RETRODESK