AVer M15-13M Manual De Instrucciones página 5

Compound Key
Press and hold for 3 seconds to operate the compound key function.
Press keys to operate the compound key function.
: Back to factory default settings.
: Press to switch between following modes:
:Press to switch between following modes:
Power Connection
Plug in power adapter and turn on M15-13M.
[Note] Press
camera back to standby mode.
Devices Connection
When M15-13M is connected to a laptop/PC via a USB cable and switched
to USB mode, a connection message will be displayed on the connected
HDMI monitor screen.
: Display system information.
: Snapshot the current screen image to software or
cloud.
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
- Normal: Adjust the gradient of image.
- Motion: Increase frame rate. Sufficient lighting is
required when using this mode.
- High quality: Better image quality.
+ when the camera doesn't work properly. The
English-3