STERWINS UP20 Instrucciones De Montaje, Utilización Y Mantenimiento página 216

FR
6. WINTERING & STORAGE
6.1 STORE THE MACHINE
ES
Let the machine cool for 2 hours outside before storing it. Be sure to secure the unit while
transporting (remove the chain). Examine the unit thoroughly for worn, loose or damaged
parts. Clean the product before storing.
Only store the machine in a clean, dry, ventilated place with a temperature range of
PT
4°C to 24°C. Cover it in order to provide added protection. Do not expose the product to sunlight.
Make sure the product is always protected from cold and humidity. We recommend using
the original package for storage or covering the product with a suitable cloth or enclosure to
protect it against dust.
IT
7. MAINTENANCE
EL
7.1 CLEANING
PL
RU Cleaning the product : illustration 5.1 to
Let the machine cool for 2 hours outside before cleaning it. Take the chain out of the chain bar.
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the
equipment with a cloth or brush. It is highly suggested that you clean the device after every use.
KZ
Do not use cleaning agents, as these can attack the plastic and weaken the structural integrity
of the product.
7.2 MAINTENANCE SCHEDULE
UA
Part
RO
CHAIN
EN
CHAIN BAR
7.3 REPLACEMENT
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage. If you shall replace the chain, make sure that the following
WARNING! DO NOT HANDLE CUTTING PARTS WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE,
POTENTIALLY CAUSING PERSONAL INJURY.
Action
CHECK
CLEAN
CHANGE
GREASE
SHARP
CHECK
CLEAN
CHANGE
GREASE
5.9
Before/After each usage
X
X
WHEN IT'S NECESSARY / REFER TO TROUBLE
SHOOTING
X
X
X
WHEN IT'S NECESSARY / REFER TO TROUBLE
SHOOTING
216
Every 10H
X
X