Kohler K-24019-GHW-0 Instrucciones De Instalación página 10

6. Install the Bath
Alignment Guides
NOTICE: Do not lift the bath by the piping or blower, or use the piping or blower for structural support of the bath. To
avoid damage to the bath, lift at the sides of the bath.
NOTE: To provide access for securing the connections, temporarily position block spacers on opposing ends between the
shroud and the bath rim. Position the blocks to avoid damaging the alignment guides located under the bath rim. The
type of alignment guides may vary by product.
With help, carefully lift the bath into place over the shroud and onto the temporary blocks.
For a rim-mount faucet, install the faucet and trim according to the faucet and trim instructions. Verify that there is
adequate support under the bath rim to support the faucet. Refer to the "Prepare the Rim-Mount Faucet (Optional)"
section.
1512795-2-A
10
Temporary
Blocks
Kohler Co.