IKRA ICPS 2020 Instrucciones De Manejo página 32

EN ENGLISH
SPECIFIED CONDITIONS OF USE
The cordless chain saw is only intended for use outdoors.
For safety reasons, the chian saw must be adequately controlled by using two-handed operation at all times.
The chain saw is designed for cutting branches, trunks, logs, and beams of a diameter determined by the cutting length
of the guide bar. It is only designed to cut wood. It is only to be used by adults who have received adequate training on
the hazards and preventative measures/actions to be taken while using the chain saw.
Do not use the chain saw for any purpose not listed in the specified conditions of use. It is not to be used for
professional tree services. The chain saw is not to be used by children or by persons not wearing adequate personal
protective equipment and clothing.
WARNING
When using the chain saw, the safety rules must
be followed. For your own safety and that of
bystanders, you must read and fully understand
these instructions before operating the chain saw.
You should attend a professionally organized safety
course in the use, preventative actions, first-aid,
and maintenance of chain saws. Please keep these
instructions safe for later use.
Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for
damages.
MAINTENANCE
DANGER
Remove the battery pack before starting any
adjustment, cleaning and maintenance work
on the device. Wait until all rotating parts have stopped
and the appliance has cooled down.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never
clean the machine and its components with solvents,
flammable or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts. Using
other spare parts can result in accidents/injuries of the user.
The manufacturer will not be liable for any such damage.
Please contact our service department if you need
accessories or spare parts.
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
30
WARNING
Chain saws are potentially dangerous tools.
Accidents involving the use of chain saws often
result in loss of limbs or death. It is not just the
chain saw that is the hazard. Falling branches,
toppling trees, and rolling logs can all kill. Diseased
or rotting timber poses additional hazards. You
should assess your capability of completing the task
safely. If there is any doubt, leave it to a professional
tree surgeon.
Keep your chain saw professionally maintained and safe.
• Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available at your
service agent. The part number is available in the product
specification table in this manual.
Follow instructions for lubricating and chain tension
checking and adjustment.
After each use, clean the machine with a soft dry cloth.
Remove any chips, dirt and debris in the battery bay.
Check all nuts, bolts, and screws at frequent intervals
for security to ensure the machine is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by a service station.
Replacement parts
Chain Oregon 91P033X
Guide Bar Oregon 080SDEA318
Chain must be fitted with bar from the same
manufacturer according to above combinations.