Descargar Imprimir esta página

Joie elevate R129 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
37
!
Pull the vehicle safety belt and pass through the belt path
, and then buckle it up.
36
!
Position shoulder belt through the shoulder belt guide
shown in
-1
36
!
DO NOT position vehicle belt over top of the armrests. It
must pass underneath the armrests.
!
The booster can not be used if the vehicle safety belt buckle
(female buckle end) is too long to anchor the booster
securely.
-3
36
!
It is very important to ensure that any lap strap is worn low
down, so that the pelvis is firmly engaged. The booster is
shown as
36
!
To ensure the correct head support height is obtained, the
bottom of the headrest MUST be even with the top of child's
shoulders as shown in
positioned in the red zone as shown in
!
Place the booster firmly against the back of a forward-
facing vehicle seat equipped with a lap/shoulder belt.
!
Have your child sit in the booster with their back flat against
the back of the booster.
!
If the belt lays across the child's neck, head or face,
readjust head support height.
!
Belt must not be twisted.
!
After using with booster mode, please do not reassemble
components that removed before.
15
38
-2
36
and the shoulder belt must be
37
38
Detach Soft Goods
-
see images
39
40
-
Follow steps
to detach soft goods.
39
40
!
To re-attach the soft goods please repeat the above steps
in the reverse step.
39
40
16

Publicidad

loading