Selector Switch; Switching The Appliance On/Off - Beem Espresso Perfect Crema Plus Manual De Instrucciones

EN

Selector switch

The selector switch can be turned to three
positions. The functions of the switch are
listed in the following table:
Symbol Position Meaning

Middle
Right

Switching the appliance on/off

Turn the appliance ON or OFF at the
‹
ON/OFF switch (2). The operating
indicator (3) lights up when the appli-
ance is switched on.
NOTE
► The appliance starts to heat up as
soon as it is switched on. When the
standby indicator (15) lights up, the
appliance is at operating tempera-
ture.
BEEM - Elements of Lifestyle
Making cof-
Left
fee/espresso
OFF/ready
for use
Steam gen-
eration
Espresso Perfect Crema Plus
Prior to first use
Clean the appliance and the acces-
‹
sories as described in the section
Cleaning and care (page 38).
Wipe the appliance and the accesso-
‹
ries with a slightly damp cloth.
Install the hot plate (1) and drip tray
‹
(9) with cup rest (10) in the appliance.
Move the selector switch (4) to the
‹

middle position
mains plug into the plug socket.
Rinse out the water tank with clean
‹
water and fill the water tank (16) up to
the — MAX — mark as described in
chapter Filling the water tank (page
33).
Place a strainer insert (6) without cof-
‹
fee powder into the strainer holder (7)
as described in the section Installing
the strainer insert (page 33).
Install the strainer holder (7) as de-
‹
scribed in the section Installing the
strainer insert (page 34).
Switch on the appliance as described
‹
in the section Switching the appli-
ance ON/OFF (page 31).
Put a suitably-sized large cup or
‹
bowl onto the cup rest (10) under the
strainer holder (7).
and insert the
31