Cleaning The Steam Nozzle - Beem Espresso Perfect Crema Plus Manual De Instrucciones

EN
Hold the strainer insert firmly with the
‹
folded up retaining bracket and tap
the used coffee out of the strainer in-
sert (6) over the waste bin.
Remove the strainer insert (6) from
‹
the strainer holder (7) and rinse out
the strainer insert and strainer holder
under running water.
Emptying/cleaning the drip tray
To empty/clean the drip tray, proceed as
follows:
Remove the cup rest (10).
‹
Raise the drip tray (9) slightly at the
‹
front and carefully pull it out of the ap-
pliance to the front.
Empty the drip tray and rinse out with
‹
warm water.
Clean the cup rest (10) using a damp
‹
cloth.
Install the drip tray and cup rest in the
‹
appliance again after drying.

Cleaning the steam nozzle

In order to avoid clogging, the steam noz-
zle must be cleaned after each use. Pro-
ceed as follows:
Pull out the plastic attachment of the
‹
steam nozzle downwards and rinse it
by hand or in the dishwasher.
BEEM - Elements of Lifestyle
Espresso Perfect Crema Plus
Align the metal pipe (15) of the appli-
‹
ance with the drip tray and turn the
selector switch (4) to the
order to rinse milk and other residue
out of the metal pipe.
Wipe down the metal tube with a
‹
damp cloth.
NOTE
► If the metal tube has become
clogged, you can clear the clogging
with a wooden toothpick.
Descale the appliance .
In order not to shorten the service life of
the appliance and impair the quality of the
coffee, the appliance must be descaled at
regular intervals. The intervals between
descaling depend on the water hardness
(in the case of hard water after 80 coffees;
and soft water after 150 coffees).
To descale the appliance, proceed as fol-
lows:
Fill the water tank to the
‹
mark with water and add citric acid or
vinegar essence (approx. 5% acid).
NOTE
► If you use a commercially available
descaling agent, observe the manu-
facturer's instructions for use.
position in
— MAX —
39