Bosch HBE5451UC Manual De Uso Y Cuidado página 16

Replacing the oven light bulb
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
customer service or from specialist retailers. Please
supply your appliance's E number and FD number. Do
not use any other type of bulb.
CAUTION
WHEN REPLACING AN OVEN LIGHT:
o Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do so
could result in electrical shock or burns.
o The lenses must be in place when using the
appliance.
o The lenses serve to protect the light bulb from
breaking.
o The lenses are made of glass. Handle carefully to
avoid breaking. Broken glass could cause an
injury.
o Light socket is live when door is open.
1=
Unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
2. Allow the cooking compartment to cool down.
3. Open the appliance door.
4. Place a tea towel in the cooking compartment to
prevent damage.
Remove the hook-in racks.
=
6.
7=
Remove the glass cover.To do this, open the glass
cover at the front with your hand. Should you
experience difficulties removing the glass cover, use a
spoon to help.
Remove the oven light bulb.
WARNING
Light socket is live when door is open if main power
supply is not turned off.
8. Replace the oven light bulb with a bulb of the same
type:
Voltage (V): 12 V;
Power: 20W;
Socket: G4
Temperature resistance: 570 ° F (300 °C)
9. Refit the glass cover for the oven light bulb.
10. Refit the hook-in racks.
11. Remove the tea towel.
12. Switch the circuit breaker back on.
13. Check that the oven lighting is working again.
16