Descargar Imprimir esta página

Fein AGSZ18-280BL AS Instrucciones De Uso página 18

Ocultar thumbs Ver también para AGSZ18-280BL AS:

Publicidad

Idiomas disponibles

Idiomas disponibles

en
18
Assembly instructions.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
For all work or when changing application tools, always wear protective
CAUTION
gloves. Danger of injury from the sharp edges of the application tools. Appli-
cation tools can become very hot while working. Danger of burns!
Removing and charging the battery
(figure 4).
Prior to the first charging procedure,
read the operating instructions of the
battery charger.
Charge the battery completely before
putting into operation for the first time.
Release the battery by pressing the battery-
unlocking button and pull the battery out of
the handle. Do not exert any force when
doing this.
Connect the battery charger to a socket out-
let, slide the battery onto the battery char-
ger and charge the battery. After the
charging process is over, insert the battery
into the power tool and pull the plug of the
battery charger out of the socket outlet.
A new battery does not reach its full capacity
until after several charging and discharging
procedures.
Battery-Unlocking button
Fig. 4
Battery
1.
2.

Publicidad

loading

Este manual también es adecuado para:

Agsz18-280lbl asAgsz18-90lbl as