cecotec BOLERO DRESSCODE 120700 A Manual De Instrucciones página 101

* - -
2. Extra Rinse
After setting the Extra Rinse function, the programme will run the rinsing process once more
before applying the softener. Therefore, the total execution time of the programme will
increase.
3. Intensive
This function can be selected to extend the washing time, enhance the washing effects, and
improve stain removal.
Note:
Water inlet warning
If the general tap is not open or the pressure is too low, the display will indicate "F01" to warn
the user.
Drainage warning
If the pipe is kinked or clogged, the water will not drain smoothly. In case it does not drain
completely for a long time, the display will indicate "F03" to warn the user.
Door lock icon
- Once the programme has started, the door lock icon will flash, and the door will lock.
- After completing the programme, the door is automatically unlocked.
- During the pause, if the safety conditions (internal temperature, amount of water, etc.)
allow the door to be opened, the door will unlock, and the indicator light will go out.
- When the door lock indicator light flashes, the door must not be forced open to avoid
personal injury.
Delay End
- The delay end function allows the machine to be used according to the user's needs, e.g.,
during the night.
- You can only press this button during standby mode to select the time.
- Once the delay end function is selected, the time will increase by 1 hour each time the
button is pressed.
- Before programming, if the programme time is less than 1h, it will be completed by
pressing the button for the first time. Then the time will increase by 1h each time the
button is pressed. If you select this option before the programme runs, you can cancel the
selected time by turning the programme knob and selecting another programme.
-
0
BOLERO DRESSCODE 120700A
* -
1400
ENGLISH
101