OHAUS Endeavor 5000 Serie Manual página 27

Endeavor 5000 Series
3 MAINTENANCE
The Light Duty/Microplate Shaker is built for long, trouble-free, dependable service. No lubrication or other
technical user maintenance is required. It needs no user maintenance beyond keeping the unit clean. Always
ensure the power is disconnected from the unit prior to any cleaning. If the unit ever requires service, contact your
Ohaus representative.
The Light Duty/Microplate Shaker should be given the care normally required for any electrical appliance. At least
every three (3) months you should:
• Unplug the unit.
• Remove any accumulated dirt from the work surface and tray.
• Check all accessory items to make sure they are properly tightened.
Attention. Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
Avoid wetting or unnecessary exposure to fumes. Spills should be removed promptly after the unit has cooled
down. Before using any cleaning or decontamination method except as noted in this section, users should check
with the manufacturer that the proposed method will not damage the equipment. The user is responsible for
carrying out appropriate decontamination if hazardous material is spilled onto or into the equipment.
EN-25