OHAUS Endeavor 5000 Serie Manual página 13

Endeavor 5000 Series
Universal Platform and Accessory Configurations for e-E51LD0420 and e-E51LD0403
1.5.8
The optional Universal Platform 30 x 22 cm e-E51LD (30770938) accessory is required for configurations listed
below. All flask clamps, medial bottle clamps and tube racks are sold separately.
Installation of Universal Platform
1. Turn unit off with power switch.
2. Remove non-skid rubber mat.
3. Loosen the four (4) thumbscrews on the shake tray.
4. Place the universal platform on the shaker tray by aligning the slots on the two sides of the platform over the
four (4) screw knobs.
5. Allow the platform to rest on the screws.
6. When aligned and seated on the screws hand tighten the four (4) thumbscrews. DO NOT overtighten.
EN-11