OHAUS Endeavor 5000 Serie Manual página 24

EN-22
Quick press to select value (En = Enabled or dIS = Disabled)

Rotate knob to select the desired setting

Quick press to confirm valued

Display Settings
Adjust LCD brightness and configure the display timeout feature, which dims the LCD to set brightness after

a selected period of idle time.
Navigate to the System Settings submenu ("SYS")

Navigate to the Power Recovery setting ("dISP")

Adjust Backlight Brightness

o Adjust the brightness percentage ("bL P")
Range: 0-100 %
o
o Quick press to select the back light brightness percentage value
o Rotate the knob to select the desired setting
Quick press to confirm value
o
Backlight Timeout Enable/Disable

o Quick press to select value ("bLtO")
o Rotate knob to select the desired setting (En = Enabled or dIS = Disabled)
Quick press to confirm value
o
When Backlight Timeout Brightness is Enabled, adjust Backlight Timeout Period

o Quick press to select value ("tO t")
Range: 1-4 hours
o
o Rotate knob to select the desired setting (select number of hours)
o Quick press to confirm value
Adjust backlight brightness while timeout is active:

Adjust the brightness percentage ("tO P")
o
o Range: 0-100 %
o Quick press to select the back light brightness percentage value
Rotate the knob to select the desired setting
o
o Quick press to confirm value
Endeavor 5000 Series