EN-2
1. INTRODUCTION
This manual contains installation, operation, and maintenance instructions for the Ohaus Endeavor 5000 Series.
Please read the manual completely before using.
1.1. Safety Information
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring
the safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.
WARNING
For a hazardous situation with medium risk, possibly resulting in severe injuries or death if not
avoided.
CAUTION
For a hazardous situation with low risk, resulting in damage to the device or the property or in loss of
data, or minor or medium injuries if not avoided.
ATTENTION For important information about the product. May lead to equipment damage if not avoided.
NOTE
For useful information about the product.
Warning Symbols
General hazard
Safety Precautions
CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or property
damage. Retain all instructions for future reference.
Always operate unit on a level surface for best performance and maximum safety
DO NOT lift unit by the tray.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly.
DO NOT immerse the unit for cleaning.
DO NOT operate the unit if it shows signs of electrical or mechanical damage.
WARNING! The protection provided by the unit may be impaired if used with accessories not
provided or recommended by the manufacturer or used in a manner not specified by the
manufacturer.
WARNING! DO NOT use the unit in a hazardous atmosphere or with hazardous materials for which
the unit was not designed.
CAUTION: To avoid electrical shock, completely cut of power to the unit by disconnecting the power
cord from the unit or unplugging from the wall outlet.
Earth Ground – Protective Conductor Terminal
Alternating Current
Endeavor 5000 Series
Electric shock hazard