Publicidad
Idiomas disponibles
Idiomas disponibles
Janome 644D Instruction Manual
(A)
1
2
3
www.toews.com
38
• Threading the Lower Looper
Open the looper cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the right side thread
guide from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
(B)
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
Thread guide
Thread guide plate
Lower looper thread tension dial
644D Owners Manual/ User Guide
Janome Serger
Publicidad
