Janome MyLock 644D Libro De Instrucciones página 88

Janome 644D Instruction Manual
HA-1 SP No.11
or No.14
S
R
www.toews.com
86
2 2 2
4 4
4
R 2
3/4
2
PIN TUCKING
* Refer to page 76 (Narrow Hemming) for thread
tension balance adjustment.
Pin tucking
Thread and Fabric
Fabric
Needle thread on the
Light to
right
Medium
Upper looper thread
Fabric
Lower looper thread
Machine Setting
Remove the needle on the left-hand side
Needle plate setting knob: R
Upper knife: Down
Lower looper pre-tension setting slider: STD
Changeable thread guide: 3/4
Sewing
Turn off the power switch.
Remove the needle on the
Deactivate the upper knife.
Turn on the power switch, then sew the folded edge
while guiding along the guide line.
Folded edge
Guide line on the needle plate
Right needle position line on the presser foot
Left needle position line on the presser foot
Right side of fabric
Open the fold flat and press the pin tucks to one side.
Note: After you finish sewing, return the upper knife
to the original position.
Pin tucking
644D Owners Manual/ User Guide
Janome Serger
Thread
Synthetic : No. 60~80
Silk : No. 50~80
Synthetic : No. 60~100
Silk : No. 50~100
side.
left-hand