Conditions Of Warranty - Migatronic FOCUS TIG 160 DC HP PFC Manual De Instrucciones

CONDITIONS OF WARRANTY

Migatronic (which is hereinafter referred to as "the Supplier")
continuously carries out quality control throughout the
manufacturing process as well as check of the complete units
through comprehensive testing.
The Supplier provides warranty in accordance with the following
provisions, by correcting errors and defects on units, that
demonstrably and within the warranty period may have been
caused by faulty material or workmanship.
The warranty period is 24 months for new welding machines, 12
months for new accessories and 6 months for spare parts. The
warranty period is calculated from the date of invoice to the end
user from the Supplier or the Supplier's dealer/distributor. The
original invoice is proof of the warranty period.
The warranty period is 12 months or maximum 1,800 operating
hours for the CoWelder solution. The warranty period is
calculated from the date of invoice to the end user from the
Supplier or the Supplier's dealer/distributor. The original invoice
is proof of the warranty period.
The warranty period is 24 months for new welding machines
incorporated in robotic, automated and CoWelder solutions. The
warranty period is calculated from the date of invoice to the end
user from the Supplier or the Supplier's dealer/distributor. The
original invoice is proof of the warranty period.
The warranty period can be extended to up to 60 months on
selected parts by registration at www.migatronic.com of new
welding machines not later than 30 days after the date of
purchase. The following welding machines fall within the scope
of the extended warranty: Automig, Automig-i, MIGx series,
Sigma Select series, Omega series, Sigma series, Sigma
Galaxy, Pi series, Pi Plasma, Zeta.
Welding torches and intermediary cables are considered as
wearing parts, and only errors and defects found within 12
months upon delivery and due to faulty material or
workmanship, will be considered under warranty.
Warranty repairs neither extend nor renew the warranty period.
Any transport of goods or persons in connection with a warranty
claim is not covered under the Supplier's warranty obligation
and will therefore be at the buyer's expense and risk.
You can read the complete Warranty Conditions at
www.migatronic.com
16