Descargar Imprimir esta página

Greencut GTC3000E Manual De Instrucciones página 74

Motoazada
Ocultar thumbs Ver también para GTC3000E:

Publicidad

Idiomas disponibles

Idiomas disponibles

74
1
2
3
4
5
1.
Rubber washers M8x20 (x10)
2.
M8x20 (x8) screws
3.
Nut M8 (x8)
4.
Battery (x1)
5.
Screw M5x10 (x2) + nut M5 (x2)
6.
Shift lever (x1)
7.
Battery base protector (x1)
8.
Battery connection cables (x1)
9.
Battery fixation (x1)
10. Spark plug wrench (x1)
11. Mounting Keys 8/10-12/14-13-13/16-17/19
12. Nuts M8 (x8)
13. Nuts M5 (x6)
14. User manual (x1)
Carefully remove the product and accessories from the box. Make sure all the items listed above are present.
Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
Do not discard the packaging material until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, contact the GREENCUT technical service. Do not
use this product without having replaced the part. Using this product with damaged or missing parts
can cause serious injury to the operator.
7
6
8
9
10
15
11
16
12
13
17
15. Allen keys nº 4 and 5 (x1)+(x1)
16. Combination screwdriver (x1)
17. Nut m5 (shift lever) (x1)
18. M6x20 (x6) screws
19. M6x16 (x4) screws
20. M6x16 (x2) screws
21. Knife fixing pins 8x50mm (x2)
22. Nylon Clamps (x5)
23. Screws M8x55 (x2)
24. Screw (shift lever) M5x20 (x1)
25. Washers 8x24mm (x6)
26. Washers 6x18mm (x6)
27. Battery mounting screws M6x90 (x2)
14
22
18
23
27
19
24
20
25
21
26

Publicidad

loading