Greencut GTC3000E Manual De Instrucciones página 77

STEP 10: HANDLEBAR ASSEMBLY
STEP 11: CONNECT THE GEARSHIFT LEVER TO THE PRE-MOUNTED SECTION OF THE TOOL
STEP 12:
1. Place the battery in its designated location.
3. Connect the positive terminal to the motor relay of the
starting.
2. Attach and tighten the upper clamp.
Subsequently connect the cables respecting
the polarity, the positive being the first one to connect.
4. After connecting the negative pole of the battery, proceed
to the connection of the same to any metal part of the motor.
77
EN