Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The straps do not
work forward
Excess heat
accumulates in
the transmission
/ tine area during
ploughing
NOTE: If you are unable to resolve the problem, contact the Authorised Service Centre.
STORAGE
PREPARATION FOR STORAGE
Follow the steps below to prepare your power tiller for storage.
1.
Protect wheels and axles from rust.
2.
Drain the fuel system completely according to the engine manufacturer's instructions or add fuel to prevent
it from freezing during storage.
3.
While the engine is still warm, drain the engine oil. Top up with the recommended oil.
4.
Clean exterior, motor and cooling fan.
5.
Remove the spark plug, pour SAE 30 oil into the spark plug hole.
6.
Pull the starter rope slowly to distribute the oil over the entire area.
7.
Replace the spark plug.
8.
Transport the machine to a suitable location. If you have chosen to use a stabilizing fuel and the fuel system
has not been drained, follow all safety instructions and storage precautions to prevent the possibility of fire
or inhalation of gasoline fumes. Remember that gasoline vapors are highly flammable.
9.
If there is any possibility of unauthorized use or tampering with the machine, remove the spark plug and
store it in a safe place before storing the power tiller.
DISPOSAL / RECYCLING
Worn products are potentially recyclable and should not be disposed of in the usual bin. Help us protect the
environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly way. Do not throw it away with the household rubbish. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green point).
Gasoline, used oils, oil / gasoline mixtures as well as objects stained with gasoline (e.g.: rags) should not be disposed
of in the usual trash, drainage, land, rivers, lake or sea. Objects stained with oil should be disposed of in accordance
with local regulations: take them to the most appropriate recycling centre.
The materials used in the packaging of the machine are recyclable: please throw them in the appropriate container.
•
Adjust the belt tension pulleys
•
Turn off the engine and let it cool down
•
Disconnect the spark plug wire
•
Pull down the safety control levers
•
Replace the spark plug strap and cable
•
Remove vegetation as instructed
•
FOLLOW ALL SAFETY INSTRUCTIONS
•
Check transmission fluid and refill if necessary.
SOLUTION
85
EN
Publicidad
