Publicidad
Idiomas disponibles
Idiomas disponibles
Water drainage
Do not bend or pull the water
drainage hose.
Height difference
between the
installation
location of the washing
machine and the drainage
point:
Maximum
8 feet / 244 cm.
Connecting
the water
drainage
hose
_3
_3
Attach the drain hose to the
end of the drain connection.
Secure the connection
point
with the clamp and tighten.
Standpipe
Installation
In-Wall
Installation
_3
_3
Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into wall
drain.
Use a strap or cable tie to hold
hose in place.
Drainage
into a siphon
1_7 Secure the connection
point
with a hose clip(not included
in
factory-supplied
equipment).
Drainage
into a sink
Ensure that the plug is not in the
drain hole.
Transport,
such as
when moving out
Before transporting
the washing
machine:
%
Turn off the water.
Disconnect
the washing
machine from the power outlet,
Dismantle the supply and
drainage hoses.
Install the transport
bolts.
Having transported
the
appliance
and ensured proper
installation
and connection,
allow the drain program
to run
through
before starting the first
wash program.
Preparing
and inserting
the
transport
bolts
_3
_3
_3
Remove the covers.
Prepare the transport
bolts:
Loosen the screw in the sleeve
until the end of the screw is
level with the end of the sleeve.
Insert and tighten all transport
bolts. Make sure that the tab on
the transportation
bolt is
inserted in the slot on the
washing
machine back panel.
1_7 Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into
standpipe.
1_7 Use a strap or cable tie to hold
hose in place.
1_7 Attach water drain hose
securely to sink.
1_7 When the water is being
drained, check that the water
flow out of the sink is adequate.
11
Publicidad
